Etch-O-Matic Starter Set

ITEM # 99-016-001

Brand: ETCH-O-MATIC

Weight: 2 lbs.

Model #: EOM-1

Short Description: EOM-1 ETCH-O-MATIC START ER SET - ETCH-O-MATIC

Technical Documents & Manuals

Tech Doc 1

Msrp: $112.51

Price: $112.51 SET

Features

·Lowest priced kit available anywhere, and it does the job in industry, in plants, machine shops, and everywhere metal marking is needed.
·The marker unit is 10 volts, 2 amps, and is excellent for light duty marking of tools and parts. (Transformer is inside marker unit)
PERMANENTLY MARKS ANYTHING METAL IN SECONDS!
·The Etch-O-Matic will etch anything that can be typed, written, drawn, or photo processed (on a special stencil) into the surface of anything made of metal: including tools, instruments, equipment, or manufactured parts.
·Your marks can be names, numbers, designs, logos, trademarks or even your own signature!
·Using an electro-chemical principle, the new Etch-O-Matic can etch as deep as .003" of an inch in less than 30 seconds, or mark the hardest tool steel and carbides almost instantly. ·It marks any flat or round metal surface down to 1/16" diameter and any metal thickness from thin foil up to the largest castings easily.
·Most marks, which look like printing or engraving, take about 3 to 20 seconds (the longer dwell times are for deep etching) and are permanently etched into the tool or manufactured part surface.
FAST AND VERY EASY TO USE!
·The Etch-O-Matic is fast and easy to use.
·Anyone in your organization can become an expert in just minutes and produce professional looking marks quickly.
·In fact, Etch-O-Matic is by far the easiest marking system to learn that is available today!
·You will also find that Etch-O-Matic, while being the fastest way to make permanent marks on anything metal, is by far the least expensive method on the market today.
·Your marks will cost just fractions of a cent to produce, and you will be extremely pleased with the result.
COMPARES WITH LASER MARKS
·Most marks made by the Etch-O-Matic will compare favorably with laser marks on metal, and are easier and sometimes even faster to make.
·You have very likely seen marks made by Etch-O-Matic hundreds of times before, especially since the marks are used so often in commerce today.
·If you have ever seen a feeler gauge, drill bit, milling cutter, saw blade, knife blade, ball bearing race, carbide cutter or thousands of other types of metal tools, parts, instruments or equipment then you have probably seen marks made by the Etch-O-Matic system.
·In fact, Etch-O-Matic has created marks in a percentage of all of the cars, trucks, commercial and military aircraft, submarines, hospital surgical instruments and implant devices. ·Etch-O-Matic has even been used to mark the nose cone of the space shuttle!

Applications

MARKING WITH GROUND PLATE
·Simply lay the tool or part on the ground plate and touch Etch-O-Matic to it for a few brief seconds and your mark is permanently etched into the surface.
MARKING ROUND SURFACES
·Drill bits, milling cutters, tubing, pipe or nearly anything round can be easily marked by "rolling" the mark on as shown above.
MAKES DEEP ETCH MARK
·Etch-O-Matic marks many metals as deep as .003" with deep etch adapter clip, a mark that can only be removed by grinding a major part of the surface away.
IT'S THAT SIMPLE
·Etch-O-Matic and the electro-chemical marking system has been proven over and over again during our 36 years in business as the best way to permanently mark anything metal.

Benefits

·The best and most cost-effective ETCH-O-MATIC starter kit makes deep marks on flat and round tools and parts in less than 30 seconds.
·These long-lasting marks can only be removed by deep grinding the metal surface.
·With the special stencils in the kit, you can transfer the typed, written, drawn, or photo-processed information into surfaces of any thickness.
·Using an electrochemical principle, the unit can make professional-looking permanent marks even on the hardest materials.

Size

7/8" x 1-3/4"

Weight

2 lbs.

Country of Origin

UNITED STATES OF AMERICA

Application

Permanently marks metal, tools and other areas.

Model #

EOM-1

Includes

(1) 2 oz. general purpose electrolyte, (1) Pack of (10) stencils: 2-1/4" x 3" (marks area 1-7/8" x 7/8"), (1) Ground plate, (1) Adapter clip (regular), (1) Neutralizer powder pack, (1) Instruction sheet.

Voltage

10V

Manufacturer Part Number

STARTER KIT

Video URL

https://www.youtube.com/watch?v=vEsWGo_stBA

No. of Pieces in Set

Unit Of Measure

Catalog Price

112.51

Product Spec Display

Brand

ETCH-O-MATIC

Type

Etch-O-Matic Starter Set

Amperage Rating

2 Amps

Type of Power

Electric

Prop. 65

Yes

Package Qty

Tech Doc 1

Etch-O-Matic Starter Set

Features

Applications

Benefits

About Us

Customer Service

My Account